Lembar Tantalum (Ta)99,95%-99,99%
Katrangan
Lembar Tantalum (Ta) digawe saka ingot tantalum. Kita minangka pemasok global Lembar Tantalum (Ta) lan bisa nyedhiyakake produk tantalum sing disesuaikan.Lembar Tantalum (Ta) diprodhuksi liwat Proses Cold-Working, liwat forging, rolling, swaging, lan drawing kanggo entuk ukuran sing dikarepake.
Tipe lan Ukuran:
Kotor logam, ppm maks bobot, Balance - Tantalum
| unsur | Fe | Mo | Nb | Ni | Si | Ti | W |
| RO5200 | 100 | 200 | 1000 | 100 | 50 | 100 | 500 |
| RO5400 | 100 | 200 | 1000 | 100 | 50 | 100 | 500 |
Kotoran non-logam, ppm maks
| unsur | C | H | O | N |
| Isi | 100 | 15 | 150 | 100 |
Sifat mekanik kanggo piring anil lan lembaran
| Ketebalan (inch) | <0.06 | ≥0.06 | |
| Annealed | Kekuatan Tarik Ultimate min (MPa) | 207 | 172 |
| Kekuwatan ngasilake min (Mpa, 2% offset) | 138 | 103 | |
| Elongation min (%, 1-in gauge dawa) | 20 | 30 | |
Toleransi dimensi kanggo lembaran lan piring tantalum
| Range Ketebalan (mm) | Toleransi Ketebalan (± mm) | Toleransi Ketebalan (Teknologi Celah) (± mm) | Torence dawa sawise trimming (± mm) | |||||
| W<152.4 | 152.4≤W<609.6 | W<152.4 | 152.4≤W<609.6 | L≤340.8 | L>340.8 | |||
| + | - | + | - | |||||
| 0.129-0.254 | 0,0127 | - | 0.305 | - | 1.59 | 0 | 6.35 | 0 |
| 0.279-0.381 | 0,0178 | 0,0254 | 0.381 | 0.381 | 1.59 | 0 | 6.35 | 0 |
| 0,406-0,508 | 0.0203 | 0,0381 | 0.381 | 0.381 | 1.59 | 0 | 6.35 | 0 |
| 0.533-0.762 | 0,0381 | 0,0635 | 0.508 | 0.635 | 1.59 | 0 | 6.35 | 0 |
| 0.787-1.524 | 0,0635 | 0,0889 | 0.635 | 0.762 | 1.59 | 0 | 6.35 | 0 |
| 1.549-2.286 | 0.1016 | 0.1270 | 0.635 | 0.889 | 1.59 | 0 | 6.35 | 0 |
| Jembar | Toleransi | dawa | Toleransi |
| 50-200 | ± 1.0 | L | / |
| 50-300 | ± 2.0 | 100-1000 | ± 2.0 |
| 50-300 | ± 2.0 | 100-1000 | ± 2.0 |
| 50-300 | ± 2.0 | 100-1500 | ± 2.0 |
| 50-600 | ± 1.0 | 50-1000 | ± 2.0 |
| 50-1000 | ± 1.0 | 50-1500 | ± 2.0 |
| 50-1000 | ± 1.0 | 50-2000 | ± 2.0 |
| 50-1000 | ± 1.0 | 50-3000 | ± 2.0 |
| 50-1000 | ± 1.0 | 50-2000 | ± 2.0 |
| 50-900 | ± 1.0 | 50-2000 | ± 2.0 |
| 50-1000 | ± 1.0 | 50-3000 | ± 2.0 |
Fitur
Kelas: RO5200, RO5400
Kemurnian: 99,95%(3N5) - 99,99%(4N)
Standar produksi: ASTM B708-05, GB/T 3629-2006
Aplikasi
Digunakake minangka pengganti platina (Pt).(bisa ngurangi biaya)
Digunakake ing manufaktur wesi super lan leleh elektron-beam.(paduan suhu dhuwur kaya paduan Ta-W, paduan Ta-Nb, aditif paduan tahan korosi.)
Digunakake ing industri kimia lan industri minyak (peralatan tahan korosi)
produk sing gegandhengan
-
Molybdenum Hammer Rods Kanggo Tungku Crystal Tunggal
Jinis lan Ukuran Diameter lumahing barang/mm dawa/mm Kapadhetan kemurnian (g/cm³) mrodhuksi methord Dia toleransi L toleransi molibdenum rod grinding ≥3-25 ±0.05 ＜5000 ±2 ≥99.95% ≥10.1 ± swaging ＞20-150 0.2 ＜2000 ±2 ≥10 penempaan ＞150 ±0.5 ＜800 ±2 ≥9.8 sintering ireng ≥3-25 ±2 ＜5000 ±2 ≥10.1 ＞10.1 ± 0.5 ＞25-15 <800...
-
Kualitas Tinggi Tantalum Crucible Pabrikan China
Katrangan Tantalum crucible digunakake minangka wadhah kanggo metalurgi langka-bumi, piring mbukak kanggo anodes saka tantalum, lan kapasitor elektrolitik niobium sintered ing suhu dhuwur, wadhah tahan karat ing industri kimia, lan crucibles penguapan, lan liners.Jinis lan Ukuran: Kanthi pengalaman pirang-pirang taun ing bidang metalurgi bubuk, mrodhuksi crucibles tantalum kanthi kemurnian sing dhuwur banget, ukuran presisi densitas dhuwur, ...
-
Lanthanated tungsten Alloy Rod
Deskripsi Lanthanated tungsten minangka lanthanum doped tungsten alloy teroksidasi, dikategorikake minangka oksidasi tungsten bumi langka (W-REO).Nalika kasebar lanthanum oksida ditambahake, lanthanated tungsten nampilake resistance panas meningkat, konduktivitas termal, resistance creep, lan suhu recrystallization dhuwur.Properti sing luar biasa iki mbantu elektroda tungsten lanthanated entuk kinerja sing luar biasa ing kemampuan wiwitan busur, erosi busur ...
-
Molybdenum Heat Shield & Layar Mo Murni
Description Molybdenum bagean shielding panas karo Kapadhetan dhuwur, dimensi pas, lumahing Gamelan, trep-assembly lan cukup-desain wis pinunjul gedhe ing Ngapikake kristal-narik.Minangka bagean panas-tameng ing pawon wutah sapir, fungsi paling nemtokake saka molybdenum tameng panas (molybdenum bayangan tameng) kanggo nyegah lan nggambarake panas.Perisai panas molybdenum uga bisa digunakake kanggo nyegah kabutuhan panas liyane ...
-
High Density Tungsten Heavy Alloy (WNICU) Plate
Katrangan Kita minangka supplier khusus ing manufaktur bagean paduan abot tungsten.Kita nggunakake bahan mentahan saka tungsten wesi abot karo kemurnian dhuwur kanggo gawé bagean.High temperature re-crystallization minangka salah sawijining fitur penting kanggo bagean alloy tungsten.Kajaba iku, nduweni plasticity dhuwur lan resistance abrasive banget.Suhu re-kristalisasi luwih saka 1500 ℃.Bagean paduan abot tungsten cocog karo standar ASTM B777 ...
-
Tabung Tungsten Murni & Pipa Tungsten
Jinis lan Ukuran Ukuran Biasa saka Tabung Tungsten Biasa Kita Bentuk Bahan OD inci OD mm ID inci ID mm Panjang inci Panjang mm W tabung tungsten 0,28" 7,112 mm 0,16" 4,064 mm 4" 101,6 mm W tabung tungsten 0,35" 8,89 mm 20" 508 mm W tabung tungsten 0.48" 12.192 mm 0.32" 8.128 mm 32" 812.8 mm W tabung tungsten 2" 50.8 mm 1.58" 40.132 mm 32" 812.8 mm W 15.4" 15.4" mm bisa produksi...
